Paugge
Ultra Certified
AOC Fiber Hdmi 2.1 Cable – 10m

Model Name: 8K60-HDMIFIBER-010
– Ultra Certified HDMI 2.1 Cable
– Active Optical Fiber HDMI 2.1 Cable
– Ultra High Speed HDMI Cable
– HDMI Version 2.1
– 48 Gbps Bandwith
– VESA DSC 1.2a Support
– 10K, 8K, 5K, 4K, 2K ve Full HD Resolution Support – 10240×4320, 7680×4320, 5120×2880, 4096×2160, 3840×2160, 1920×1080
– 10K 120Hz, 10K 60Hz, 8K 120Hz, 8K 60Hz, 5K 120Hz, 5K 60Hz, 4K 120Hz, 4K 60Hz Refresh Rate Support
– 3D Video Support – Wide Color Gamut (WCG)
– Hybrid Log Gamma (HLG)
– Dynamic High Dynamic Range (D HDR)
– High Dynamic Range (HDR)
– Enhanced Audio Return Channel (eARC)
– Audio Return Channel (ARC)
– HDMI Ethernet Channel (HEC)
– Auto Low Latency Mode (ALLM)
– Quick Frame Transport (QFT)
– Quick Media Switching (QMS)
– Variable Refresh Rate (VRR)
– Hot Plug Detection (HPD)
– Dolby Vision™ – Dolby Atmos™
– 7.1 True HD Dolby
– Lossless HD Audio
– DTS HD Master Audio
– DTS:X
– Dolby TrueHD
– 21:9 Aspect Ratio
– HDCP 2.2
– BT.2020
– 32 Channel Audio
– 1536kHz Audio
– Multi Channel Audio
– Dual View
– Gold Plated
– 10 Meter

Paugge AOC Fiber Hdmi 2.1 Cable Main Features

The name AOC (Active Optical Cable) means that it is an active cable. Therefore, the cable makes use of an auxiliary integrated circuit (chipset). Specifically, in each of the two connectors of which the cable is made up there is a chipset, which is where both the fibre optic conductors that transmit the video and audio signals and the copper conductors for the power supply and other signals are connected.

The chipset in the connectors has at the input the function of transforming the electrical signal into a fibre optic signal, based on the sending of light pulses. At the output, the chipset has the reverse function of transforming the fibre signal into an electrical signal. This is the reason why the AOC HDMI cables are unidirectional with one connector that must always be connected to the emitter (source) and another one that is always connected to the receiver (display).

HDMI® Specification 2.1  is the most recent update of the HDMI specification and supports a range of higher video resolutions and refresh rates including 8K60 and 4K120, and resolutions up to 10K. Dynamic HDR formats are also supported, and bandwidth capability is increased up to 48Gbps.

Supporting the 48Gbps bandwidth is the new Ultra High Speed HDMI Cable. The cable ensures ultra high-bandwidth dependent features are delivered including uncompressed 8K video with HDR. It features exceptionally low EMI (electro-magnetic interference) which reduces interference with nearby wireless devices. The cable is backwards compatible and can be used with the existing installed base of HDMI devices.

Learn More

Dynamic HDR

The HDMI 2.1 Specification supports multiple static and dynamic HDR solutions. HDR enhances video images with an extended dark to bright contrast range for deeper blacks and brighter whites, greater detail in both the dark and bright parts in the same image, and greater detail within an extended color space. Includes Dynamic HDR, HDR, HDR10 and Dolby Vision technologies. Dynamic HDR enables a noticeable progression in overall video image quality from SDR to static HDR, and now static HDR to dynamic HDR. Dynamic HDR support ensures every moment of a video is displayed at its ideal values for depth, detail, brightness, contrast, and wider color gamuts—on a scene-by-scene or even a frame-by-frame basis. HDR-enhanced content is available for movies, videos, TV shows, video and PC games and VR.

Learn More

HDMI 2.1 features Enhanced Audio Return Channel (eARC) which is an advancement over the previous Audio Return Channel (ARC). eARC simplifies connectivity and provides greater ease of use for multiple components discovery and audio optimization. It supports the latest high-bitrate audio formats up to192kHz, 24-bit, and uncompressed 5.1 and 7.1, and 32-channel uncompressed audio. It also supports DTS-HD Master Audio™, DTS:X®, Dolby® TrueHD, Dolby Atmos®. Now it’s easier than ever to experience movie theater quality sound in a living room for an immersive multi-dimensional experience and enhanced audio detail and depth. eARC enables the audio to a TV that originates from cable, satellite, streaming or source devices to be sent to an AVR or sound bar through a single HDMI cable. This ensures the simplicity of connectivity and that the original audio can be experienced.

Learn More

Enhanced Gaming Features

One of the highlights from the HDMI 2.1 specification’s multiple gaming and media features is Variable Refresh Rate. VRR reduces or eliminates lag, judder and frame tearing for more fluid and better detailed gameplay. VRR enables a gaming source such as a console or computer to deliver video frames as fast as it can, which in many cases is slower than the normal static refresh rate.

Graphics processors require different absolute periods to render each frame, and this time is dependent upon the complexity of the scene, the horsepower of the GPU, the resolution selected and the frame rate. When the GPU is taxed by the other three factors and does not finish rendering the next frame by the time it needs to be displayed, the source must either repeat the current frame or display the partially-rendered next frame, which causes judder and tearing.

Learn More

Auto Low Latency Mode enables the ideal latency setting to automatically be set allowing for smooth, lag-free and uninterrupted viewing and interactivity. In many cases this is referred to as game mode, and it usually has to be set manually which involves going through menus and settings and then switching back again for normal viewing. ALLM lets a game console, PC or other device send a signal to the display which will cause it to automatically switch to a low-latency, low-lag mode for gaming. This could benefit other uses, such as karaoke and video conferencing too.

Learn More

HDMI 2.1 features Quick Media Switching for movies and video which eliminates the delay that can result in blank screens before content is displayed. QMS uses the VRR mechanism to eliminate the blackout period when all devices in the HDMI connection chain change video modes. As long as the resolution remains the same and only the frame rate changes, QMS will smoothly switch between frame rates. For example, when looking at trailers from a streaming service, some may be in 24Hz, 50Hz, or 60Hz. Every time a trailer with a different frame rate is selected, the entire system must change its clocking and re-sync, causing an A/V blackout (a “bonk”). Knowing that a change-of-video mode causes bonks, streaming services may compensate and add a built-in delay so that users don’t miss the first part of the trailer. Or they may output everything at the same frame rate which requires either the streaming service to provide single-frequency streams or the streaming box to perform the conversion. QMS eliminates bonks by using the VRR mechanism to change frame rates, allowing rapid, smooth changes from a nominal 60Hz rate to any media rate below it (down to 24Hz). The viewer never sees blank screens and gets a seamless experience.

Learn More

Another highlight from the HDMI 2.1 specification’s multiple gaming and media features is Quick Frame Transport.  QFT reduces latency for smoother no-lag gaming, and real-time interactive virtual reality. QFT transports each frame at a higher rate to decrease “display latency”, which is the amount of time between a frame being ready for transport in the GPU and that frame being completely displayed. This latency is the sum of the transport time through the source’s output circuits, the transport time across the interface, the processing of the video data in the display, and the painting of the screen with the new data. This overall latency affects the responsiveness of games, such as how long between a button is pressed to the time at which the resultant action is observed on the screen. While there are a lot of variables in this equation, not many are adjustable from an HDMI specification perspective. QFT operates on the transport portion of this equation by reducing the time it takes to send only the active video across the cable. This results in reduced display latency and increased responsiveness.

Learn More

High Performance Hdmi Cable for the Professional Products

The HDMI output of the PS5 is hdmi 2.1 and supports 48 Gbps bandwidth. Paugge hdmi 2.1 cable has 48 Gbps bandwidth, thanks to its superior quality for 4K 120Hz, 4K 60Hz and HDR as you can take advantage of the most excellent features by PS5.

Learn More

The HDMI output of the XBOX SERIES X and XBOX SERIES S is hdmi 2.1 and supports 48 Gbps bandwidth. Paugge hdmi 2.1 cable has 48 Gbps bandwidth, thanks to its superior quality for 4K 120Hz, 4K 60Hz and HDR as you can take advantage of the most excellent features by XBOX.

Learn More

The HDMI output of the Apple TV 4K is hdmi 2.0a and supports 18 Gbps bandwidth. Paugge hdmi 2.1 cable has 48 Gbps bandwidth, thanks to its superior quality for 4K 60Hz, HDR, Dolby Vision, Dolby Atmos as you can take advantage of the most excellent features by Apple TV 4K. For HDR and Dolby Vision, HDMI cable must support hdmi 2.1, hdmi 2.0a or hdmi 2.0b. Standart hdmi 2.0 cables do not support HDR and Dolby Vision. It should be kept in mind that many unqualified and fake cables, which do not support HDR and Dolby Vision, are sold on the market as hdmi 2.0 Paugge hdmi 2.1 cable supports receive images on your Apple TV 4K in the following formats; 4K SDR 60Hz YCbCr 4: 4: 4 4K SDR 60Hz RGB High 4K HDR 60Hz YCbCr 4: 2: 2 4K HDR Dolby Vision

Learn More

The HDMI output of the SHIELD TV Pro is hdmi 2.0b and supports 18 Gbps bandwidth. Paugge hdmi 2.1 cable has 48 Gbps bandwidth, thanks to its superior quality for 4K 60Hz, HDR, HDR10, Dolby Vision and Dolby Atmos as you can take advantage of the most excellent features by Shield TV. For HDR, HDMI cable must support hdmi 2.1, hdmi 2.0a or hdmi 2.0b. Standart hdmi 2.0 cables do not support HDR. It should be kept in mind that many unqualified and fake cables, which do not support HDR, are sold on the market as hdmi 2.0.

Learn More