Paugge 15m Fiber Displayport 1.4 Cable

* DP V1.4 bandwidth to enable resolutions up to 8K 7680×4320@60Hz(DSC) and 4K 3840×2160@120Hz
* Displayport Male to Displayport Male
* 32.40 Gbps Bandwith
* HBR3 (DisplayPort High Bit Rate 3) (8.10 Gbit/s per lane)
* 7680 × 4320, 5120 × 2880, 3840×2160, 2560×1600, 1920×1200, 1920×1080, 1280×720, 1024×768 Resolution Support
* 8K 60Hz, 8K 30Hz, 5K 120Hz, 4K 120Hz, 4K 60Hz, 2K 240Hz, 2K 165Hz, 2K 144Hz, Full HD 240Hz, Full HD 165Hz, Full HD 144Hz Refresh Rate Support
* 4320p 60Hz, 4320p 30Hz, 2160p 120Hz, 2160p 60Hz, 1440p 240Hz, 1440p 165Hz, 1440p 144Hz, 1080p 240Hz, 1080p 165Hz, 1080p 144Hz Refresh Rate Support
* YCbCr 4:4:4 , YCbCr 4:2:2 , YCbCr 4:2:0 , BT 2020
* High Dynamic Range (HDR10)
* Display Stream Compression (DSC 1.2)
* High Bandwith Digital Content Protection (HDCP 2.2)
* Dual Mode (DP++) (Maximum DP++ Bandwith 18 Gbit/s 600MHz)
* Stereoscopic 3D Video
* Forward Error Correction
* 32 Audio Channels (24bits)
* AdaptiveSync Support / FreeSync Support / G-Sync Support
* Upstream Device Detection Support
* HPD (Hot Plug Detection) Support
* MST (Multi Stream Transport) Support
* Downwards compatible to older Displayport standards (V1.3 / V1.2 / V1.1)
* Plug and Play ( No special driver installation or additional power source required )
* Compatible with Mac OS X, Linux, and Windows on supported systems
* 100% Pure Conductor / 24K Gold Plated / EMI Shielding Protection
* Color: Black
* Length: 15m

Paugge 15m Fiber Displayport 1.4 Cable Main Features

  • Micro-packet architecture over 1- 4 lanes
  • Up to 8.1 Gbps per lane–32.4 Gbps over 4 lanes
  • Allowing for overhead — 25.92 Gbps over 4 lanes
  • Increased bandwidth allows 5K monitors (5120 x 2880) with a single cable and no compression
  • Multiple display support–two 4K UHD monitors (3840 x 2160) using VESA Coordinated Video Timing supported from a single connector
  • Continued support for video conversion to VGA, DVI and HDMI
  • Support for HDCP 2.2 and HDMI 2.0 with CEC
  • Support for 4:2:0 pixel structure which enables 8K x 4K displays
  • Ability to support UHD monitor @60Hz and 24-bit color over (2) lanes while assigning other 2 lanes for alternate data types such as USB as allowed in DockPort
Learn More

Paugge Fiber DisplayPort 1.4 Cable has 32.40 Gbps Bandwith and fully supports  8K 60Hz, 4K 120Hz, 5K 120Hz, 4K 60Hz, 2K 165Hz, 2K 144Hz, Full HD 240Hz, Full HD 165Hz and Full HD 144 Hz.

* 7680 × 4320, 5120 × 2880, 3840×2160, 2560×1600, 1920×1200, 1920×1080, 1280×720, 1024×768 Resolution Support
* 8K 60Hz, 8K 30Hz, 5K 120Hz, 4K 120Hz, 4K 60Hz, 2K 240Hz, 2K 165Hz, 2K 144Hz, Full HD 240Hz, Full HD 165Hz Refresh Rate Support
* 4320p 60Hz, 4320p 30Hz, 2160p 120Hz, 2160p 60Hz, 1440p 240Hz, 1440p 165Hz, 1440p 144Hz, 1080p 240Hz, 1080p 165Hz Refresh Rate Support

High Dynamic Range (HDR) is the new standard for picture quality, offering a much wider range of colour, contrast and clarity.

HDR improves the picture even further to reveal previously unavailable levels of realism, making you really feel a part of the scene.

The transition between the brightest and darkest points is much richer and more progressive, as there are more intermediate tones available that the screen can display.

Includes HDR, HDR10 technology.

Learn More

HDCP 2.2  is a technology designed to prevent illegal copying of 4K Ultra HD content.

Every link in the video chain must support HDCP 2.2 — Graphic Card’s source, Monitor, Displayport Cable and any component the video signal passes through.

The Graphic Card, monitor and the displayport cable that has Displayport 1.4 port supports HDCP 2.2

If any port is Displayport 1.2, the system doesnt support HDCP 2.2

Paugge 8K60-DPFIBER-015 model displayport cable is version 1.4 and supports HDCP 2.2

  • Long distance transmission starting 15 meters up to 50 meters
  • DisplayPort 1.4 standard, supports 8K@60hz UHD, 4K@120hz UHD and 4K@60hz UHD display
  • Lock on connector
  • Plug and play without driver dependent
  • Thinner, lighter and softer than conventional copper cable
  • Highly resistant with EMI and RFI
  • No external power needed
Cable Length
15m
Lengths 15m/20m/30m/40m/50m
Interface
DP type A plug – DP type A plug, with lock on connector
Bandwidth
DisplayPort V1.4, 8.1Gbps x 4

Support 8K@60hz UHD, 4K@120hz UHD and 4K@60hz UHD display

Power
No external power needed
Power Consumption
375mW@3.3V
Mechanical / Condition
Cable diameter 4.0mm
Bend Radius (Dynamic/Static) 20mm/10mm
Tensile Strength (Long term/Short term) 100N/200N
Crush Resistance (Long term/Short term) 200N/400N
Operating / Storage Temp 0 ~ 50°C/-20 ~ 70°C
  • Home Theater
  • High definition Video Meeting System
  • Medical Video System
  • High definition Video Surveillance System
  • Digital Signage and TV Wall
Item Contents Value Supplement
1、Sub Cable Tight buffer fiber OM1 fiber 4cores,blue、orange、green、brown 500um tight buffer fiber
Sub sheath OD=1.4—1.5mm
2、AUX standard wires 28AWG 7*0.127 OD= 1.3mm
3、GND 24AWG 18*0.127 OD=0.9-0.92mm
4、PWR 24AWG 18*0.127 OD=0.9-0.92mm
5、HPD 28AWG 7*0.127 OD=0.60-0.65mm
6、Drain Wires 28AWG 7*0.127 OD=0.39mm
7、Aramid Kevlar Strength member 4*1610dtex
8、Shielding Braid layer Aluminum foil
9、Outer Sheath Thermoplastic elastomer materials OD=4.0±0.15mm,

Thickness=0.50±0.10mm

Fiber_Displayport_Specification